Create A Bootable El Capitan Usb

Posted on by admin

Bootable USB Installers for OS X Mavericks, Yosemite, El Capitan, and Sierra

Nov 24, 2019 it to the InstallMACOSX.pkg. Double-click on that and you will get an installer window. (this does not install El Capitan), follow the prompts and it will create the Install OS X El Capitan.app. In your Applications folder. Now you should be able to use the createinstallmedia command to create. Your bootable USB. Nov 24, 2019 3:55 PM. How to make a bootable El Capitan Installer. Download and keep a copy of the ‘Install OS X El Capitan’ App. (Download from App store but make a copy of it before you install it as the Apple Installer deletes it after you use it.) Put it in your ‘Applications’ folder. Format your blank USB (8GB is a good size) as Apple OS X Extended.


First, review this introductory article: Create a bootable installer for macOS. Second, see this How To outline for creating a bootable El Capitan installer. Simply replace the Terminal command with the one from the preceding article by copying it into the Terminal window. You will need an 8GB or larger USB flash drive that has been partitioned and formatted for use with OS X.


Drive Partition and Format

  1. Open Disk Utility in the Utilities' folder.
  2. After Disk Utility loads select the drive (out-dented entry with the mfg.'s ID and size) from the side list.
  3. Click on the Erase tab in the Disk Utility toolbar. Name the drive, 'MyVolume'. <---- IMPORTANT!
  4. In the drop down panel set the partition scheme to GUID. Set the Format type to Mac OS Extended (Journaled.)
  5. Click on the Apply button and wait for the Done button to activate. When it does click on it.
  6. Quit Disk Utility.


Create Installer

Open the Terminal in the Utilities' folder. Choose the appropriate command line (in red) depending upon what OS X installer you want. Paste that entire command line from below at the Terminal's prompt:


Command for macOS High Sierra:

sudo /Applications/Install macOS High Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install macOS High Sierra.app

Bootable

Command for macOS Sierra:

sudo /Applications/Install macOS Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install macOS Sierra.app

Command for El Capitan:

sudo /Applications/Install OS X El Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install OS X El Capitan.app

Command for Yosemite:

sudo /Applications/Install OS X Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install OS X Yosemite.app

Command for Mavericks:

sudo /Applications/Install OS X Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install OS X Mavericks.app

How To Create A Bootable El Capitan Usb Drive


Press RETURN. You will be asked for your admin password. It will not echo to the Terminal window. Then press RETURN again. Wait for the return of the Terminal prompt signifying the process has completed. It takes quite some time to finish. Be patient.

Sep 13, 2018 1:16 PM

  • Download Mac OS EL Capitan 10.11 latest version; How to create Bootable USB for Mac OS El Capitan on Windows; How to Install Mac OS X El Capitan on Virtualbox on Windows; Steps to Install Mac OS X El Capitan on VMware on PC. Before going to start creating a new Virtual machine for Mac OS X El Capitan you need to install unlocker for VMware.
  • If you wanna create bootable USB flash drive for Mac OS X El Capitan on Windows PC. You need a TransMac Software. That’s not a problem if you use a computer that supports legacy or UEFI. Just you need TransMac and El Capitan dmg file. Siddharth choubisa September 20, 2016 at 3:43 PM.

Catalina 32 bit. These advanced steps are primarily for system administrators and people who are familiar with the command line. You don't need a bootable installer to upgrade macOS or reinstall macOS, but it can be useful when you want to install it on multiple computers without having to download the installer each time.

What you need to create a bootable installer

  • A USB flash drive or other secondary volume, formatted as Mac OS Extended, with at least 12 GB of available storage
  • A downloaded installer for macOS Big Sur, Catalina, Mojave, High Sierra or El Capitan

Download macOS

  • Download: macOS Big Sur, macOS Catalina, macOS Mojave or macOS High Sierra
    These will be downloaded to your Applications folder as an app called Install macOS [version name]. If the installer opens after download, quit it without continuing the installation. To get the correct installer, download from a Mac that is using macOS Sierra 10.12.5 or later, or El Capitan 10.11.6. For enterprise administrators, please download from Apple, not a locally hosted software update server.
  • Download: OS X El Capitan
    This will be downloaded as a disk image called InstallMacOSX.dmg. On a Mac that is compatible with El Capitan, open the disk image and run the installer within, which has the name InstallMacOSX.pkg. It installs an app named Install OS X El Capitan into your Applications folder. You will create the bootable installer from this app, not from the disk image or .pkg installer.

Use the 'createinstallmedia' command in Terminal

Select the type of disk being used. Note that if you’re using a 8GB (or larger) USB thumb drive, it will be completely erased. DiskMaker will erase any complete volume that you signify, so if you wish to make a disk that can install Yosemite, El Capitan, and Sierra, consider using Disk Utility (found in the Applications/Utilities folder) to partition the drive into three separate volumes. How To: Create a Bootable Install USB Drive of Mac OS X 10.10 Yosemite How To: Change OS X’s Annoying Default Settings Using Terminal How To: Dual Boot Mac OS X 10.11 El Capitan & 10.10 Yosemite How To: Create a Bootable Install USB Drive of Mac OS X 10.11 El Capitan.

  1. Connect the USB flash drive or other volume that you're using for the bootable installer.
  2. Open Terminal, which is in the Utilities folder of your Applications folder.
  3. Type or paste one of the following commands in Terminal. These assume that the installer is in your Applications folder and MyVolume is the name of the USB flash drive or other volume you're using. If it has a different name, replace MyVolume in these commands with the name of your volume.

Big Sur:*

Catalina:*

Mojave:*

High Sierra:*

El Capitan:

Make Bootable Usb From Iso

* If your Mac is using macOS Sierra or earlier, include the --applicationpath argument and installer path, similar to the way this was done in the command for El Capitan.


After typing the command:

  1. Press Return to enter the command.
  2. When prompted, type your administrator password and press Return again. Terminal doesn't show any characters as you type your password.
  3. When prompted, type Y to confirm that you want to erase the volume, then press Return. Terminal displays the progress as the volume is being erased.
  4. After the volume has been erased, you may see an alert stating that Terminal would like to access files on a removable volume. Click OK to allow the copy to proceed.
  5. When Terminal says it's finished, the volume will have the same name as the installer you downloaded, such as Install macOS Big Sur. You can now quit Terminal and eject the volume.

Use the bootable installer

Determine whether you're using a Mac with Apple silicon, then follow the appropriate steps:

Apple silicon

  1. Plug the bootable installer into a Mac that is connected to the Internet and compatible with the version of macOS you're installing.
  2. Turn on your Mac and continue to hold the power button until you see the startup options window, which shows your bootable volumes and a gear icon labelled Options.
  3. Select the volume containing the bootable installer, then click Continue.
  4. When the macOS installer opens, follow the onscreen instructions.

Intel processor

  1. Plug the bootable installer into a Mac that is connected to the Internet and compatible with the version of macOS you're installing.
  2. Press and hold the Option (Alt) ⌥ key immediately after turning on or restarting your Mac.
  3. Release the Option key when you see a dark screen displaying your bootable volumes.
  4. Select the volume containing the bootable installer. Then click the up arrow or press Return.
    If you can't start up from the bootable installer, make sure the External Boot setting in Startup Security Utility has been set to allow booting from external media.
  5. Choose your language, if prompted.
  6. Select Install macOS (or Install OS X) from the Utilities window, then click Continue and follow the onscreen instructions.
Bootable

Learn more

For more information about the createinstallmedia command and the arguments that you can use with it, make sure the macOS installer is in your Applications folder, then enter the appropriate path in Terminal:

Create A Bootable El Capitan Usb
  • Big Sur: /Applications/Install macOS Big Sur.app/Contents/Resources/createinstallmedia
  • Catalina: /Applications/Install macOS Catalina.app/Contents/Resources/createinstallmedia
  • Mojave: /Applications/Install macOS Mojave.app/Contents/Resources/createinstallmedia
  • High Sierra: /Applications/Install macOS High Sierra.app/Contents/Resources/createinstallmedia
  • El Capitan: /Applications/Install OS X El Capitan.app/Contents/Resources/createinstallmedia

El Capitan Create Bootable Usb Windows

A bootable installer doesn't download macOS from the Internet, but it does require an Internet connection to get firmware and other information specific to the Mac model.